Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

2HH-38A-R4-V2

8-port multibeam antenna, 8x 1695–2200 MHz, 4x 38° HPBW, 4x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Enhances network capacity through six sectors site application with only three antenna faces
  • Maximizes frequency spectrum utilization to increase Average Revenue Per User (ARPU)
  • Reduces antenna count to minimize Cap-Ex and Op-Ex costs
  • High gain with excellent sector edge roll-off and azimuth sidelobe suppression
  • Each antenna downtilt can be independently adjusted for greater flexibility in network optimization

General Specifications

Antenna Type Multibeam
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (4)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 10 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 640 mm | 25.197 in
Depth 235 mm | 9.252 in
Length 1224 mm | 48.189 in
Net Weight, without mounting kit 29.7 kg | 65.477 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1695 – 2200 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 1695–1880 1850–1990 1920–2200
Gain, dBi 19.3 19.7 20.0
Beam Centers, Horizontal, degrees ±27 ±27 ±27
Beamwidth, Horizontal, degrees 38 36 34
Beamwidth, Vertical, degrees 7.7 7.3 6.8
Beam Tilt, degrees 2–10 2–10 2–10
Horizontal Sidelobe, dB 24 24 23
USLS (First Lobe), dB 24 24 24
Front-to-Back Ratio at 180°, dB 36 36 34
Isolation, Cross Polarization, dB 30 30 30
Isolation, Inter-band, dB 17 17 17
VSWR | Return loss, dB 1.43 | 15.0 1.43 | 15.0 1.43 | 15.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153
Input Power per Port at 50°C, maximum, watts 200 200 200

Electrical Specifications, BASTA

Frequency Band, MHz 1695–1880 1850–1990 1920–2200
Gain by all Beam Tilts, average, dBi 18.9 19.4 19.6
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.4 ±0.7
Gain by Beam Tilt, average, dBi 2 ° | 18.8
6 ° | 19.0
10 ° | 18.9
2 ° | 19.3
6 ° | 19.5
10 ° | 19.4
2 ° | 19.8
6 ° | 19.7
10 ° | 19.2 (915)
Beamwidth, Horizontal Tolerance, degrees ±1.6 ±1.7 ±3.2
Beamwidth, Vertical Tolerance, degrees ±0.4 ±0.3 ±0.6
USLS, beampeak to 20° above beampeak, dB 18 19 19
Front-to-Back Total Power at 180° ± 30°, dB 28 29 28
CPR at Boresight, dB 21 22 21
CPR at Sector, dB 11 13 12

Mechanical Specifications

Wind Loading @ Velocity, frontal 505.0 N @ 150 km/h (113.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 156.0 N @ 150 km/h (35.1 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 688.0 N @ 150 km/h (154.7 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 520.0 N @ 150 km/h (116.9 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 752 mm | 29.606 in
Depth, packed 387 mm | 15.236 in
Length, packed 1379 mm | 54.291 in
Weight, gross 44.1 kg | 97.224 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Multibeam
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (4)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 10 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 640 mm | 25.197 in
Depth 235 mm | 9.252 in
Length 1224 mm | 48.189 in
Net Weight, without mounting kit 29.7 kg | 65.477 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1695 – 2200 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 1695–1880 1850–1990 1920–2200
Gain, dBi 19.3 19.7 20.0
Beam Centers, Horizontal, degrees ±27 ±27 ±27
Beamwidth, Horizontal, degrees 38 36 34
Beamwidth, Vertical, degrees 7.7 7.3 6.8
Beam Tilt, degrees 2–10 2–10 2–10
Horizontal Sidelobe, dB 24 24 23
USLS (First Lobe), dB 24 24 24
Front-to-Back Ratio at 180°, dB 36 36 34
Isolation, Cross Polarization, dB 30 30 30
Isolation, Inter-band, dB 17 17 17
VSWR | Return loss, dB 1.43 | 15.0 1.43 | 15.0 1.43 | 15.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153
Input Power per Port at 50°C, maximum, watts 200 200 200

Electrical Specifications, BASTA

Frequency Band, MHz 1695–1880 1850–1990 1920–2200
Gain by all Beam Tilts, average, dBi 18.9 19.4 19.6
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.4 ±0.7
Gain by Beam Tilt, average, dBi 2 ° | 18.8; 6 ° | 19.0;10 ° | 18.9 2 ° | 19.3; 6 ° | 19.5;10 ° | 19.4 2 ° | 19.8; 6 ° | 19.7;10 ° | 19.2 (915)
Beamwidth, Horizontal Tolerance, degrees ±1.6 ±1.7 ±3.2
Beamwidth, Vertical Tolerance, degrees ±0.4 ±0.3 ±0.6
USLS, beampeak to 20° above beampeak, dB 18 19 19
Front-to-Back Total Power at 180° ± 30°, dB 28 29 28
CPR at Boresight, dB 21 22 21
CPR at Sector, dB 11 13 12

Mechanical Specifications

Wind Loading @ Velocity, frontal 505.0 N @ 150 km/h (113.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 156.0 N @ 150 km/h (35.1 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 688.0 N @ 150 km/h (154.7 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 520.0 N @ 150 km/h (116.9 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 752 mm | 29.606 in
Depth, packed 387 mm | 15.236 in
Length, packed 1379 mm | 54.291 in
Weight, gross 44.1 kg | 97.224 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant/Exempted