Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

10P-4L6M-D5

10-port sector antenna, 4x 694–960 and 6x 1695–2690 MHz, 65° HPBW, 5x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • All Internal RET actuators are connected in “Cascaded SRET” configuration
  • Supports re-configurable antenna sharing capability enabling control of the internal RET system using up to two separate RET compatible OEM radios

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 6
RF Connector Quantity, low band 4
RF Connector Quantity, total 10

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET Low band (2) | Mid band (3)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 2688 mm | 105.827 in
Net Weight, antenna only 43.2 kg | 95.240 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 694–790 790–890 880–960 1695–1880 1850–1990 1920–2180 2300–2500 2500–2690
Gain, dBi 15.8 16.4 16.8 17.0 17.6 17.8 18.3 17.8
Beamwidth, Horizontal, degrees 70 67 62 59 60 61 61 69
Beamwidth, Vertical, degrees 8.1 7.4 6.8 7.5 7 6.6 5.7 5.3
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 12 16 17 20 20 20 18 16
Front-to-Back Ratio at 180°, dB 32 32 33 37 38 36 34 33
Isolation, Cross Polarization, dB 28 28 28 28 28 28 28 28
Isolation, Inter-band, dB 30 30 30 30 30 30 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 300 300 300 250 250 250 200 200

Electrical Specifications, BASTA

Frequency Band, MHz 694–790 790–890 880–960 1695–1880 1850–1990 1920–2180 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 15.5 16.2 16.6 16.5 17.2 17.4 17.8 17.2
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.4 ±0.3 ±0.9 ±0.5 ±0.6 ±0.6 ±0.7
Beamwidth, Horizontal Tolerance, degrees ±4.4 ±2.9 ±4.6 ±3.7 ±1.6 ±2.3 ±6.4 ±6.3
Beamwidth, Vertical Tolerance, degrees ±0.4 ±0.6 ±0.4 ±0.5 ±0.3 ±0.5 ±0.3 ±0.2
USLS, beampeak to 20° above beampeak, dB 12 15 16 13 15 16 15 13
Front-to-Back Total Power at 180° ± 30°, dB 21 21 22 30 32 29 28 27
CPR at Boresight, dB 25 25 25 18 22 22 17 17
CPR at Sector, dB 8 5 7 8 10 9 8 5

Mechanical Specifications

Wind Loading @ Velocity, frontal 1,070.0 N @ 150 km/h (240.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 375.0 N @ 150 km/h (84.3 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,385.0 N @ 150 km/h (311.4 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 880.0 N @ 150 km/h (197.8 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 565 mm | 22.244 in
Depth, packed 368 mm | 14.488 in
Length, packed 2874 mm | 113.150 in
Weight, gross 64.7 kg | 142.639 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 6
RF Connector Quantity, low band 4
RF Connector Quantity, total 10

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET Low band (2) | Mid band (3)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 2688 mm | 105.827 in
Net Weight, antenna only 43.2 kg | 95.240 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 694–790 790–890 880–960 1695–1880 1850–1990 1920–2180 2300–2500 2500–2690
Gain, dBi 15.8 16.4 16.8 17.0 17.6 17.8 18.3 17.8
Beamwidth, Horizontal, degrees 70 67 62 59 60 61 61 69
Beamwidth, Vertical, degrees 8.1 7.4 6.8 7.5 7 6.6 5.7 5.3
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 12 16 17 20 20 20 18 16
Front-to-Back Ratio at 180°, dB 32 32 33 37 38 36 34 33
Isolation, Cross Polarization, dB 28 28 28 28 28 28 28 28
Isolation, Inter-band, dB 30 30 30 30 30 30 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 300 300 300 250 250 250 200 200

Electrical Specifications, BASTA

Frequency Band, MHz 694–790 790–890 880–960 1695–1880 1850–1990 1920–2180 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 15.5 16.2 16.6 16.5 17.2 17.4 17.8 17.2
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.4 ±0.3 ±0.9 ±0.5 ±0.6 ±0.6 ±0.7
Beamwidth, Horizontal Tolerance, degrees ±4.4 ±2.9 ±4.6 ±3.7 ±1.6 ±2.3 ±6.4 ±6.3
Beamwidth, Vertical Tolerance, degrees ±0.4 ±0.6 ±0.4 ±0.5 ±0.3 ±0.5 ±0.3 ±0.2
USLS, beampeak to 20° above beampeak, dB 12 15 16 13 15 16 15 13
Front-to-Back Total Power at 180° ± 30°, dB 21 21 22 30 32 29 28 27
CPR at Boresight, dB 25 25 25 18 22 22 17 17
CPR at Sector, dB 8 5 7 8 10 9 8 5

Mechanical Specifications

Wind Loading @ Velocity, frontal 1,070.0 N @ 150 km/h (240.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 375.0 N @ 150 km/h (84.3 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,385.0 N @ 150 km/h (311.4 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 880.0 N @ 150 km/h (197.8 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 565 mm | 22.244 in
Depth, packed 368 mm | 14.488 in
Length, packed 2874 mm | 113.150 in
Weight, gross 64.7 kg | 142.639 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification