Warning Icon
This product will be discontinued on: March 30, 2024

For other alternatives, please contact us for more information.

0 Replacement products available

HBXX-3817TB1-VTM | HBXX-3817TB1-A2M

4-port multibeam antenna, 4x 1710–2180 MHz, 2x 38° HPBW, RET compatible

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Enhances network capacity through six sectors site application with only three antenna faces
  • Single panel design supporting two separate beams perfectly optimized at horizontal pointing angles of +27 degrees and –27 degrees from boresight
  • Maximizes frequency spectrum utilization to increase Average Revenue Per User (ARPU)
  • Reduces antenna count to minimize Cap-Ex and Op-Ex costs
  • High gain with excellent sector edge roll-off and azimuth sidelobe suppression
  • Each antenna downtilt can be independently adjusted for greater flexibility in network optimization

General Specifications

Antenna Type Multibeam
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, total 4

Remote Electrical Tilt (RET) Information

Model with Factory Installed AISG 2.0 Actuator HBXX-3817TB1-A2M

Dimensions

Width 301 mm | 11.85 in
Depth 181 mm | 7.126 in
Length 1390 mm | 54.724 in
Net Weight, without mounting kit 13.6 kg | 29.983 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1710 – 2180 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 1710–1880 1850–1990 1920–2180
Gain, dBi 19.3 19.6 19.9
Beam Centers, Horizontal, degrees ±27 ±27 ±27
Beamwidth, Horizontal, degrees 38 36 34
Beamwidth, Vertical, degrees 7.6 7.1 6.7
Beam Tilt, degrees 0–10 0–10 0–10
Horizontal Sidelobe, dB 24 24 22
USLS (First Lobe), dB 23 23 23
Gain Roll-off at Boresight, dB 10 9 9
Gain Roll-off at Boresight Tolerance, dB ±0.7 ±0.8 ±0.9
Front-to-Back Ratio at 180°, dB 33 34 35
Isolation, Cross Polarization, port to port, dB 30 30 30
VSWR | Return loss, dB 1.43 | 15.0 1.43 | 15.0 1.43 | 15.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150
Input Power per Port, maximum, watts 250 250 250

Electrical Specifications, BASTA

Frequency Band, MHz 1710–1880 1850–1990 1920–2180
Gain by all Beam Tilts, average, dBi 18.9 19.4 19.6
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.3 ±0.6
Gain by Beam Tilt, average, dBi 0 ° | 18.7
5 ° | 19.0
10 ° | 18.9
0 ° | 19.1
5 ° | 19.5
10 ° | 19.4
0 ° | 19.5
5 ° | 19.7
10 ° | 19.2 (915)
Beamwidth, Horizontal Tolerance, degrees ±1.5 ±1.2 ±2.1
Beamwidth, Vertical Tolerance, degrees ±0.4 ±0.3 ±0.5
USLS, beampeak to 20° above beampeak, dB 17 18 18
Front-to-Back Total Power at 180° ± 30°, dB 29 30 28
CPR at Boresight, dB 24 24 18
CPR at Sector, dB 12 15 13

Mechanical Specifications

Wind Loading @ Velocity, frontal 202.0 N @ 150 km/h (45.4 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 166.0 N @ 150 km/h (37.3 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 388.0 N @ 150 km/h (87.2 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 205.0 N @ 150 km/h (46.1 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 404 mm | 15.906 in
Depth, packed 310 mm | 12.205 in
Length, packed 1598 mm | 62.913 in
Weight, gross 25 kg | 55.115 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

General Specifications

Antenna Type Multibeam
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, total 4

Remote Electrical Tilt (RET) Information

Model with Factory Installed AISG 2.0 Actuator HBXX-3817TB1-A2M

Dimensions

Width 301 mm | 11.85 in
Depth 181 mm | 7.126 in
Length 1390 mm | 54.724 in
Net Weight, without mounting kit 13.6 kg | 29.983 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1710 – 2180 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 1710–1880 1850–1990 1920–2180
Gain, dBi 19.3 19.6 19.9
Beam Centers, Horizontal, degrees ±27 ±27 ±27
Beamwidth, Horizontal, degrees 38 36 34
Beamwidth, Vertical, degrees 7.6 7.1 6.7
Beam Tilt, degrees 0–10 0–10 0–10
Horizontal Sidelobe, dB 24 24 22
USLS (First Lobe), dB 23 23 23
Gain Roll-off at Boresight, dB 10 9 9
Gain Roll-off at Boresight Tolerance, dB ±0.7 ±0.8 ±0.9
Front-to-Back Ratio at 180°, dB 33 34 35
Isolation, Cross Polarization, port to port, dB 30 30 30
VSWR | Return loss, dB 1.43 | 15.0 1.43 | 15.0 1.43 | 15.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150
Input Power per Port, maximum, watts 250 250 250

Electrical Specifications, BASTA

Frequency Band, MHz 1710–1880 1850–1990 1920–2180
Gain by all Beam Tilts, average, dBi 18.9 19.4 19.6
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.3 ±0.6
Gain by Beam Tilt, average, dBi 0 ° | 18.7; 5 ° | 19.0; 10 ° | 18.9 0 ° | 19.1; 5 ° | 19.5; 10 ° | 19.4 0 ° | 19.5; 5 ° | 19.7; 10 ° | 19.2 (915)
Beamwidth, Horizontal Tolerance, degrees ±1.5 ±1.2 ±2.1
Beamwidth, Vertical Tolerance, degrees ±0.4 ±0.3 ±0.5
USLS, beampeak to 20° above beampeak, dB 17 18 18
Front-to-Back Total Power at 180° ± 30°, dB 29 30 28
CPR at Boresight, dB 24 24 18
CPR at Sector, dB 12 15 13

Mechanical Specifications

Wind Loading @ Velocity, frontal 202.0 N @ 150 km/h (45.4 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 166.0 N @ 150 km/h (37.3 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 388.0 N @ 150 km/h (87.2 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 205.0 N @ 150 km/h (46.1 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 404 mm | 15.906 in
Depth, packed 310 mm | 12.205 in
Length, packed 1598 mm | 62.913 in
Weight, gross 25 kg | 55.115 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant