Warning Icon
This product was discontinued on: March 27, 2020

For other alternatives, please contact us for more information.

0 Replacement products available

TTTT90AP-1XR

8-port sector Planar Array Antenna, 2496–2690 MHz, 90° HPBW, 1x RET

Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Excellent solution for site sharing and maximizing capacity
  • Employs state-of-the-art ultra wideband technology providing excellent RF performance in all bands
  • MIMO ready

General Specifications

Antenna Type Sector
Band Single band
Calibration Connector Interface N Female
Calibration Connector Quantity 1
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material PVC, UV resistant
Radiator Material Low loss circuit board
RF Connector Interface 4.1-9.5 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (1)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 10 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 307 mm | 12.087 in
Depth 118 mm | 4.646 in
Length 1610 mm | 63.386 in
Net Weight, without mounting kit 15.5 kg | 34.172 lb
TDD Column Spacing 58 mm | 2.283 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 2496 – 2690 MHz
Polarization ±45°

Electrical Specifications, Broadcast 65°

Beamwidth, Horizontal 68 °
Beamwidth, Vertical 5 °
Beamwidth, Vertical Tolerance ±0.5°
CPR at Boresight 17 dB
Front-to-Back Total Power at 180° ± 30° 32 dB
Gain 18 dBi
Fill -21 dB

Electrical Specifications, Single Column

Beamwidth, Horizontal 96 °
Beamwidth, Vertical 4.7 °
Beamwidth, Vertical Tolerance ±0.25°
CPR at Boresight 15 dB
CPR at Sector 13 dB
Front-to-Back Total Power at 180° ± 30° 30 dB
Gain 17.2 dBi
Input per Port, maximum 250 W
USLS at Main Beam up to +10° 18 dB

Beam Forming Weights

Click on image to enlarge.

Electrical Specifications

Frequency Band, MHz 2496–2690
Gain, dBi 17.8
Beamwidth, Horizontal, degrees 96
Beamwidth, Vertical, degrees 4.7
Beam Tilt, degrees 0–8
USLS, typical, dB 18
Coupling level, Amp, Antenna port to Cal port, dB 26
Coupling level, max Amp Δ, Antenna port to Cal port, dB ±2
Coupler, max Amp Δ, Antenna port to Cal port, dB 0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees 7
CPR at 3 dB Horizontal Beamwidth, dB 14.000000
Isolation, Cross Polarization, dB 25
VSWR | Return loss, dB 1.45 | 14.7
PIM, 3rd Order, 2 x 20 W, dBc -143
Input Power per Port, maximum, watts 250

Mechanical Specifications

Mechanical Tilt Range 0°–17°
Wind Loading @ Velocity, frontal 559.0 N @ 150 km/h (125.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 114.0 N @ 150 km/h (25.6 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 677.0 N @ 150 km/h (152.2 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 413 mm | 16.26 in
Depth, packed 257 mm | 10.118 in
Length, packed 1740 mm | 68.504 in
Weight, gross 23.3 kg | 51.368 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Sector
Band Single band
Calibration Connector Interface N Female
Calibration Connector Quantity 1
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material PVC, UV resistant
Radiator Material Low loss circuit board
RF Connector Interface 4.1-9.5 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (1)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 10 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 307 mm | 12.087 in
Depth 118 mm | 4.646 in
Length 1610 mm | 63.386 in
Net Weight, without mounting kit 15.5 kg | 34.172 lb
TDD Column Spacing 58 mm | 2.283 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 2496 – 2690 MHz
Polarization ±45°

Electrical Specifications, Broadcast 65°

Beamwidth, Horizontal 68 °
Beamwidth, Vertical 5 °
Beamwidth, Vertical Tolerance ±0.5°
CPR at Boresight 17 dB
Front-to-Back Total Power at 180° ± 30° 32 dB
Gain 18 dBi
Fill -21 dB

Electrical Specifications, Single Column

Beamwidth, Horizontal 96 °
Beamwidth, Vertical 4.7 °
Beamwidth, Vertical Tolerance ±0.25°
CPR at Boresight 15 dB
CPR at Sector 13 dB
Front-to-Back Total Power at 180° ± 30° 30 dB
Gain 17.2 dBi
Input per Port, maximum 250 W
USLS at Main Beam up to +10° 18 dB

Electrical Specifications

Frequency Band, MHz 2496–2690
Gain, dBi 17.8
Beamwidth, Horizontal, degrees 96
Beamwidth, Vertical, degrees 4.7
Beam Tilt, degrees 0–8
USLS, typical, dB 18
Coupling level, Amp, Antenna port to Cal port, dB 26
Coupling level, max Amp Δ, Antenna port to Cal port, dB ±2
Coupler, max Amp Δ, Antenna port to Cal port, dB 0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees 7
CPR at 3 dB Horizontal Beamwidth, dB 14.000000
Isolation, Cross Polarization, dB 25
VSWR | Return loss, dB 1.45 | 14.7
PIM, 3rd Order, 2 x 20 W, dBc -143
Input Power per Port, maximum, watts 250

Mechanical Specifications

Mechanical Tilt Range 0°–17°
Wind Loading @ Velocity, frontal 559.0 N @ 150 km/h (125.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 114.0 N @ 150 km/h (25.6 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 677.0 N @ 150 km/h (152.2 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 413 mm | 16.26 in
Depth, packed 257 mm | 10.118 in
Length, packed 1740 mm | 68.504 in
Weight, gross 23.3 kg | 51.368 lb
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant/Exempted

Product Specification

Product Specification