Warning Icon

For other alternatives, please contact us for more information.

0 Replacement products available

TMA-T-21-A-V | E15S07P25

Tower Mounted Amplifier, Twin AWS with AISG and Variable Gain
Specifications
Finish making your selections or clear them to view relevant specifications.
How to Buy
Specifications

Product Classification

Product Type 1-BTS:1-ANT (Uniplex) | Tower mounted amplifier

General Specifications

Color Gray
Modularity 2-Twin
Mounting Pole | Wall
Mounting Pipe Hardware Band clamps (2)
RF Connector Interface 7-16 DIN Female
RF Connector Interface Body Style Long neck

Dimensions

Height 160 mm | 6.299 in
Width 196 mm | 7.717 in
Depth 78 mm | 3.071 in
Ground Screw Diameter 6 mm | 0.236 in
Mounting Pipe Diameter Range 40–160 mm

Outline Drawing

Click on image to enlarge.

Electrical Specifications

License Band, LNA AWS 1700

Electrical Specifications, dc Power/Alarm

dc Switching/Redundancy Yes
Lightning Surge Current 20 kA
Lightning Surge Current Waveform 8/20 waveform
Operating Current at Voltage 100 mA @ 12 V
Operating Current Tolerance ±20 mA
Voltage 7–30 Vdc
Voltage, CWA Mode 10–18 Vdc
Alarm Current, CWA Mode 180–200 mA @ 10–18 V

Electrical Specifications, AISG

AISG Carrier 2.176 MHz ± 100 ppm
AISG Connector 8-pin DIN Female
AISG Connector Standard IEC 60130-9
Default Protocol AISG 2.0
Protocol AISG 2.0
Voltage, AISG Mode 10–30 Vdc

Electrical Specifications

Sub-module 1 | 2
Branch 1
Port Designation ANT
AISG 2.0 Device Subunit E15S07P25 1
License Band AWS 1700, LNA

Electrical Specifications, Band Pass

Sub-module 1 | 2
Higher Order PIM, typical, dBc -153
Higher Order PIM Test Method 1 x 20 W AWS CW tone
1 x 20 W PCS CW tone

Electrical Specifications, Rx Uplink

Frequency Range, MHz 1710–1755
Bandwidth, MHz 45.00
Gain, nominal, dB 12.0
Gain Tolerance, dB ±1.0
Gain Adjustment Range, dB 4-12
Gain Adjustment Range Increments, dB 1
Noise Figure at 8 dB, maximum, dB 1.8
Noise Figure at 4 dB, maximum, dB 2.7
Noise Figure, typical, dB 1.2
Noise Figure at 8 dB, typical, dB 1.5
Noise Figure at 4 dB, typical, dB 2.4
Total Group Delay, maximum, ns 60
Output IP3, minimum, dBm 22
Return Loss, typical, dB 22
Return Loss at 8 dB, typical, dB 19
Return Loss at 4 dB, typical, dB 19
Insertion Loss - Bypass Mode, typical, dB 1.5
Return Loss - Bypass Mode, typical, dB 18
TX Band Rejection, minimum, dB 60

Electrical Specifications, Tx Downlink

Frequency Range, MHz 2110–2155
Bandwidth, MHz 45.00
Insertion Loss, maximum, dB 0.30
Total Group Delay, maximum, ns 10
Input Power, RMS, maximum, W 200

Block Diagram

Click on image to enlarge.

Material Specifications

Finish Painted

Environmental Specifications

Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity Up to 100%
Corrosion Test Method IEC 60068-2-11, 30 days
Ingress Protection Test Method IEC 60529:2001, IP67

Packaging and Weights

Included Mounting hardware
Weight, net 3 kg | 6.614 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

Product Classification

Product Type 1-BTS:1-ANT (Uniplex) | Tower mounted amplifier

General Specifications

Color Gray
Modularity 2-Twin
Mounting Pole | Wall
Mounting Pipe Hardware Band clamps (2)
RF Connector Interface 7-16 DIN Female
RF Connector Interface Body Style Long neck

Dimensions

Height 160 mm | 6.299 in
Width 196 mm | 7.717 in
Depth 78 mm | 3.071 in
Ground Screw Diameter 6 mm | 0.236 in
Mounting Pipe Diameter Range 40–160 mm

Electrical Specifications

License Band, LNA AWS 1700

Electrical Specifications, dc Power/Alarm

dc Switching/Redundancy Yes
Lightning Surge Current 20 kA
Lightning Surge Current Waveform 8/20 waveform
Operating Current at Voltage 100 mA @ 12 V
Operating Current Tolerance ±20 mA
Voltage 7–30 Vdc
Voltage, CWA Mode 10–18 Vdc
Alarm Current, CWA Mode 180–200 mA @ 10–18 V

Electrical Specifications, AISG

AISG Carrier 2.176 MHz ± 100 ppm
AISG Connector 8-pin DIN Female
AISG Connector Standard IEC 60130-9
Default Protocol AISG 2.0
Protocol AISG 2.0
Voltage, AISG Mode 10–30 Vdc

Electrical Specifications

Sub-module 1 | 2
Branch 1
Port Designation ANT
AISG 2.0 Device Subunit E15S07P25 1
License Band AWS 1700, LNA

Electrical Specifications, Band Pass

Sub-module 1 | 2
Higher Order PIM, typical, dBc -153
Higher Order PIM Test Method 1 x 20 W AWS CW tone; 1 x 20 W PCS CW tone

Electrical Specifications, Rx Uplink

Frequency Range, MHz 1710–1755
Bandwidth, MHz 45.00
Gain, nominal, dB 12.0
Gain Tolerance, dB ±1.0
Gain Adjustment Range, dB 4-12
Gain Adjustment Range Increments, dB 1
Noise Figure at 8 dB, maximum, dB 1.8
Noise Figure at 4 dB, maximum, dB 2.7
Noise Figure, typical, dB 1.2
Noise Figure at 8 dB, typical, dB 1.5
Noise Figure at 4 dB, typical, dB 2.4
Total Group Delay, maximum, ns 60
Output IP3, minimum, dBm 22
Return Loss, typical, dB 22
Return Loss at 8 dB, typical, dB 19
Return Loss at 4 dB, typical, dB 19
Insertion Loss - Bypass Mode, typical, dB 1.5
Return Loss - Bypass Mode, typical, dB 18
TX Band Rejection, minimum, dB 60

Electrical Specifications, Tx Downlink

Frequency Range, MHz 2110–2155
Bandwidth, MHz 45.00
Insertion Loss, maximum, dB 0.30
Total Group Delay, maximum, ns 10
Input Power, RMS, maximum, W 200

Material Specifications

Finish Painted

Environmental Specifications

Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity Up to 100%
Corrosion Test Method IEC 60068-2-11, 30 days
Ingress Protection Test Method IEC 60529:2001, IP67

Packaging and Weights

Included Mounting hardware
Weight, net 3 kg | 6.614 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
Other Ways to Browse