Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

VV-65B-R1

4-port sector antenna, 4x 1695–2690 MHz, 65° HPBW, 1x RET . The two high band arrays utilize a common tilt.

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • The RET interface comprises one pair of AISG input/output ports
  • Meets -153dBc 3rd order PIM, using 2x40W carriers

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material PVC
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, total 4

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (1)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 10 W
Protocol 3GPP/AISG 2.0

Dimensions

Width 305 mm | 12.008 in
Depth 118 mm | 4.646 in
Length 1787 mm | 70.354 in
Net Weight, antenna only 12.7 kg | 27.999 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 400 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 1695–1880 1850–1990 1920–2200 2300–2500 2500–2690
Gain, dBi 18.3 18.7 19.0 19.2 19.3
Beamwidth, Horizontal, degrees 66 65 65 61 58
Beamwidth, Vertical, degrees 5.6 5.2 4.9 4.3 4.1
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 21 21 18 17 16
Front-to-Back Ratio at 180°, dB 32 34 36 35 36
Isolation, Cross Polarization, dB 30 30 30 30 30
Isolation, Inter-band, dB 30 30 30 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 40 W, dBc -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 300 300 300 300 250

Electrical Specifications, BASTA

Frequency Band, MHz 1695–1880 1850–1990 1920–2200 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 17.9 18.4 18.7 18.9 18.9
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.4 ±0.4 ±0.4 ±0.5
Beamwidth, Horizontal Tolerance, degrees ±2.9 ±1.7 ±1.5 ±2.6 ±4.3
Beamwidth, Vertical Tolerance, degrees ±0.3 ±0.3 ±0.4 ±0.2 ±0.2
USLS, beampeak to 20° above beampeak, dB 16 16 16 15 13
Front-to-Back Total Power at 180° ± 30°, dB 25 25 26 27 26
CPR at Boresight, dB 16 18 18 21 19
CPR at Sector, dB 10 10 10 8 9

Mechanical Specifications

Wind Loading @ Velocity, frontal 663.0 N @ 150 km/h (149.0 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 140.0 N @ 150 km/h (31.5 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 803.0 N @ 150 km/h (180.5 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 404 mm | 15.906 in
Depth, packed 278 mm | 10.945 in
Length, packed 1923 mm | 75.709 in
Weight, gross 23.3 kg | 51.368 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material PVC
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, total 4

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (1)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 10 W
Protocol 3GPP/AISG 2.0

Dimensions

Width 305 mm | 12.008 in
Depth 118 mm | 4.646 in
Length 1787 mm | 70.354 in
Net Weight, antenna only 12.7 kg | 27.999 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 400 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 1695–1880 1850–1990 1920–2200 2300–2500 2500–2690
Gain, dBi 18.3 18.7 19.0 19.2 19.3
Beamwidth, Horizontal, degrees 66 65 65 61 58
Beamwidth, Vertical, degrees 5.6 5.2 4.9 4.3 4.1
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 21 21 18 17 16
Front-to-Back Ratio at 180°, dB 32 34 36 35 36
Isolation, Cross Polarization, dB 30 30 30 30 30
Isolation, Inter-band, dB 30 30 30 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 40 W, dBc -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 300 300 300 300 250

Electrical Specifications, BASTA

Frequency Band, MHz 1695–1880 1850–1990 1920–2200 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 17.9 18.4 18.7 18.9 18.9
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.4 ±0.4 ±0.4 ±0.5
Beamwidth, Horizontal Tolerance, degrees ±2.9 ±1.7 ±1.5 ±2.6 ±4.3
Beamwidth, Vertical Tolerance, degrees ±0.3 ±0.3 ±0.4 ±0.2 ±0.2
USLS, beampeak to 20° above beampeak, dB 16 16 16 15 13
Front-to-Back Total Power at 180° ± 30°, dB 25 25 26 27 26
CPR at Boresight, dB 16 18 18 21 19
CPR at Sector, dB 10 10 10 8 9

Mechanical Specifications

Wind Loading @ Velocity, frontal 663.0 N @ 150 km/h (149.0 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 140.0 N @ 150 km/h (31.5 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 803.0 N @ 150 km/h (180.5 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 404 mm | 15.906 in
Depth, packed 278 mm | 10.945 in
Length, packed 1923 mm | 75.709 in
Weight, gross 23.3 kg | 51.368 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification