E15Z01P13
Tower Mounted Amplifier, Twin Diplexed Dual Band 850/1900 with AISG
Specifications
Product Classification
| Product Type | 1-BTS:2-ANT (Diplex) | Tower mounted amplifier |
General Specifications
| Color | Gray |
| Modularity | 2-Twin |
| Mounting Pipe Hardware | Band clamps (2) |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Interface Body Style | Long neck |
Dimensions
| Height | 330 mm | 12.992 in |
| Width | 184 mm | 7.244 in |
| Depth | 140 mm | 5.512 in |
| Ground Screw Diameter | 6 mm | 0.236 in |
| Mounting Pipe Diameter Range | 50–120 mm |
Outline Drawing
| Click on image to enlarge. |
Electrical Specifications
| License Band, LNA | CEL 850 | PCS 1900 |
Electrical Specifications, dc Power/Alarm
| dc Switching/Redundancy | No |
| Lightning Surge Current | 5 kA |
| Lightning Surge Current Waveform | 8/20 waveform |
| Operating Current at Voltage | 240 mA @ 12 V | 70 mA @ 24 V |
| Operating Current Tolerance | ±30 mA |
| Voltage | 7–30 Vdc |
| Voltage, CWA Mode | 10–18 Vdc |
| Alarm Current, CWA Mode | 30–170 mA @ 10–18 V |
Electrical Specifications, AISG
| AISG Carrier | 2.176 MHz ± 100 ppm |
| AISG Connector | 8-pin DIN Female |
| AISG Connector Standard | IEC 60130-9 |
| Default Protocol | AISG 2.0 |
| Protocol | AISG 1.1 | AISG 2.0 |
| Voltage, AISG Mode | 10–30 Vdc |
Electrical Specifications
| Sub-module | 1 | 2 | 1 | 2 |
| Branch | 1 | 2 |
| Port Designation | ANT 850 | ANT 1900 |
| License Band | CEL 850, LNA | PCS 1900, LNA |
Electrical Specifications, Band Reject
| Frequency Range, MHz | 851–856 | |
| Attenuation, minimum, dB | 30.0 |
Electrical Specifications, Rx Uplink
| Frequency Range, MHz | 824–849 | 1850–1910 |
| Bandwidth, MHz | 25.00 | 60.00 |
| Gain, nominal, dB | 12.0 | 12.0 |
| Gain Tolerance, dB | +1.3/-1.0 | +1.3/-1.0 |
| Noise Figure, typical, dB | 1.1 | 1.5 |
| Group Delay Variation, maximum, ns | 270 | 50 |
| Group Delay Variation Bandwidth, MHz | 5.00 | 5.00 |
| Total Group Delay, maximum, ns | 370 | 180 |
| Output IP3, minimum, dBm | 25 | 21 |
| Return Loss, minimum, dB | 18 | 18 |
| Insertion Loss - Bypass Mode, typical, dB | 2.0 | 3.0 |
| Return Loss - Bypass Mode, typical, dB | 18 | 18 |
| TX Band Rejection, minimum, dB | 80 | 80 |
Electrical Specifications, Tx Downlink
| Frequency Range, MHz | 869–894 | 1930–1990 |
| Bandwidth, MHz | 25.00 | 60.00 |
| Insertion Loss, maximum, dB | 0.50 | 0.90 |
| Group Delay Variation, maximum, ns | 25 | 20 |
| Group Delay Variation Bandwidth, MHz | 5.00 | 5.00 |
| Total Group Delay, maximum, ns | 65 | 60 |
| Return Loss, minimum, dB | 18 | 18 |
| Input Power, RMS, maximum, W | 500 | 300 |
| Input Power, PEP, maximum, W | 5,000 | 3,000 |
| 3rd Order PIM, typical, dBc | -155 | -155 |
| 3rd Order PIM Test Method | 2 x 20 W CW tones | 2 x 20 W CW tones |
Block Diagram
| Click on image to enlarge. |
Material Specifications
| Finish | Painted |
Mechanical Specifications
| Wind Loading @ Velocity, maximum | 60.0 N @ 115 km/h (13.5 lbf @ 115 km/h) |
| Wind Speed, maximum | 200 km/h (124 mph) |
Environmental Specifications
| Operating Temperature | -40 °C to +65 °C (-40 °F to +149 °F) |
| Relative Humidity | Up to 100% |
| Corrosion Test Method | IEC 60068-2-11, 30 days |
| Ingress Protection Test Method | IEC 60529:2001, IP67 |
Packaging and Weights
| Included | Mounting hardware |
| Weight, net | 10.9 kg | 24.03 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
Product Classification
| Product Type | 1-BTS:2-ANT (Diplex) | Tower mounted amplifier |
General Specifications
| Color | Gray |
| Modularity | 2-Twin |
| Mounting Pipe Hardware | Band clamps (2) |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Interface Body Style | Long neck |
Dimensions
| Height | 330 mm | 12.992 in |
| Width | 184 mm | 7.244 in |
| Depth | 140 mm | 5.512 in |
| Ground Screw Diameter | 6 mm | 0.236 in |
| Mounting Pipe Diameter Range | 50–120 mm |
Electrical Specifications
| License Band, LNA | CEL 850 | PCS 1900 |
Electrical Specifications, dc Power/Alarm
| dc Switching/Redundancy | No |
| Lightning Surge Current | 5 kA |
| Lightning Surge Current Waveform | 8/20 waveform |
| Operating Current at Voltage | 240 mA @ 12 V | 70 mA @ 24 V |
| Operating Current Tolerance | ±30 mA |
| Voltage | 7–30 Vdc |
| Voltage, CWA Mode | 10–18 Vdc |
| Alarm Current, CWA Mode | 30–170 mA @ 10–18 V |
Electrical Specifications, AISG
| AISG Carrier | 2.176 MHz ± 100 ppm |
| AISG Connector | 8-pin DIN Female |
| AISG Connector Standard | IEC 60130-9 |
| Default Protocol | AISG 2.0 |
| Protocol | AISG 1.1 | AISG 2.0 |
| Voltage, AISG Mode | 10–30 Vdc |
Electrical Specifications
| Sub-module | 1 | 2 | 1 | 2 |
| Branch | 1 | 2 |
| Port Designation | ANT 850 | ANT 1900 |
| License Band | CEL 850, LNA | PCS 1900, LNA |
Electrical Specifications, Band Reject
| Frequency Range, MHz | 851–856 | |
| Attenuation, minimum, dB | 30.0 |
Electrical Specifications, Rx Uplink
| Frequency Range, MHz | 824–849 | 1850–1910 |
| Bandwidth, MHz | 25.00 | 60.00 |
| Gain, nominal, dB | 12.0 | 12.0 |
| Gain Tolerance, dB | +1.3/-1.0 | +1.3/-1.0 |
| Noise Figure, typical, dB | 1.1 | 1.5 |
| Group Delay Variation, maximum, ns | 270 | 50 |
| Group Delay Variation Bandwidth, MHz | 5.00 | 5.00 |
| Total Group Delay, maximum, ns | 370 | 180 |
| Output IP3, minimum, dBm | 25 | 21 |
| Return Loss, minimum, dB | 18 | 18 |
| Insertion Loss - Bypass Mode, typical, dB | 2.0 | 3.0 |
| Return Loss - Bypass Mode, typical, dB | 18 | 18 |
| TX Band Rejection, minimum, dB | 80 | 80 |
Electrical Specifications, Tx Downlink
| Frequency Range, MHz | 869–894 | 1930–1990 |
| Bandwidth, MHz | 25.00 | 60.00 |
| Insertion Loss, maximum, dB | 0.50 | 0.90 |
| Group Delay Variation, maximum, ns | 25 | 20 |
| Group Delay Variation Bandwidth, MHz | 5.00 | 5.00 |
| Total Group Delay, maximum, ns | 65 | 60 |
| Return Loss, minimum, dB | 18 | 18 |
| Input Power, RMS, maximum, W | 500 | 300 |
| Input Power, PEP, maximum, W | 5,000 | 3,000 |
| 3rd Order PIM, typical, dBc | -155 | -155 |
| 3rd Order PIM Test Method | 2 x 20 W CW tones | 2 x 20 W CW tones |
Material Specifications
| Finish | Painted |
Mechanical Specifications
| Wind Loading @ Velocity, maximum | 60.0 N @ 115 km/h (13.5 lbf @ 115 km/h) |
| Wind Speed, maximum | 200 km/h (124 mph) |
Environmental Specifications
| Operating Temperature | -40 °C to +65 °C (-40 °F to +149 °F) |
| Relative Humidity | Up to 100% |
| Corrosion Test Method | IEC 60068-2-11, 30 days |
| Ingress Protection Test Method | IEC 60529:2001, IP67 |
Packaging and Weights
| Included | Mounting hardware |
| Weight, net | 10.9 kg | 24.03 lb |
| Click on image to enlarge. |
| Click on image to enlarge. |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
Documentation & Downloads
Installation Instruction
Product Specification
Video
Filter Products – Designed for PIM Excellence
Filter Products – Designed for PIM Excellence
Warranty
Installation Instruction
Product Compliance Documentation
Product Specification
Video
Filter Products – Designed for PIM Excellence
Filter Products – Designed for PIM Excellence
Warranty
Other Ways to Browse
