CNT-400-FR
CNT-400-FR, CNT® 50 Ohm Braided Coaxial Cable, black non-halogenated, fire retardant polyolefin jacket, Dca s2 d2 Compliant
Specifications
Product Classification
| Product Type | Braided coaxial cable |
| Product Brand | CNT® |
| Product Series | CNT-400 |
General Specifications
| Braid Coverage | 90 % |
| Cable Type | CNT-400 |
| Jacket Color | Black |
Dimensions
| Diameter Over Dielectric | 7.24 mm | 0.285 in |
| Diameter Over Jacket | 10.29 mm | 0.405 in |
| Diameter Over Tape | 7.391 mm | 0.291 in |
| Inner Conductor OD | 2.74 mm | 0.108 in |
| Outer Conductor OD | 8.08 mm | 0.318 in |
| Nominal Size | 0.400 in |
Electrical Specifications
| Cable Impedance | 50 ohm |
| Capacitance | 78 pF/m | 23.774 pF/ft |
| dc Resistance, Inner Conductor | 4.49 ohms/km | 1.369 ohms/kft |
| dc Resistance, Outer Conductor | 5.61 ohms/km | 1.71 ohms/kft |
| dc Test Voltage | 2500 V |
| Jacket Spark Test Voltage (rms) | 4000 V |
| Maximum Frequency | 16.2 GHz |
| Operating Frequency Band | 30 – 6000 MHz |
| Peak Power | 16 kW |
| Shielding Effectiveness | 90 dB |
| Velocity | 85 % |
Attenuation
| Frequency | Attenuation (dB/100 m) | Attenuation (dB/100 ft) |
| 30.0 MHz | 2.490 | 0.760 |
| 50.0 MHz | 3.180 | 0.970 |
| 150.0 MHz | 4.920 | 1.500 |
| 220.0 MHz | 6.230 | 1.900 |
| 450.0 MHz | 8.860 | 2.700 |
| 900.0 MHz | 12.800 | 3.900 |
| 1500.0 MHz | 16.700 | 5.100 |
| 1800.0 MHz | 18.400 | 5.600 |
| 2000.0 MHz | 19.400 | 5.900 |
| 2400.0 MHz | 21.650 | 6.600 |
| 2500.0 MHz | 22.000 | 6.700 |
| 3000.0 MHz | 24.600 | 7.500 |
| 4000.0 MHz | 28.870 | 8.800 |
| 4500.0 MHz | 30.840 | 9.400 |
| 5000.0 MHz | 32.810 | 10.000 |
| 5200.0 MHz | 33.460 | 10.200 |
| 5500.0 MHz | 34.780 | 10.600 |
| 5800.0 MHz | 35.760 | 10.900 |
| 6000.0 MHz | 36.420 | 11.100 |
Material Specifications
| Braid Material | Tinned copper |
| Dielectric Material | Foam PE |
| Jacket Material | Non-halogenated, fire retardant polyolefin |
| Inner Conductor Material | Copper-clad aluminum wire |
| Shield Tape Material | Aluminum |
Mechanical Specifications
| Minimum Bend Radius, Single Bend | 25.4 mm | 1 in |
| Tensile Strength | 73 kg | 160.937 lb |
| Bending Moment | 0.7 N-m | 6.196 in lb |
| Flat Plate Crush Strength | 0.7 kg/mm | 39.198 lb/in |
Environmental Specifications
| Installation temperature | -40 °C to +60 °C (-40 °F to +140 °F) |
| Operating Temperature | -40 °C to +60 °C (-40 °F to +140 °F) |
| Storage Temperature | -40 °C to +60 °C (-40 °F to +140 °F) |
| EN50575 CPR Cable EuroClass Fire Performance | Dca |
| EN50575 CPR Cable EuroClass Smoke Rating | s2 |
| EN50575 CPR Cable EuroClass Droplets Rating | d2 |
| Fire Retardancy Test Method | UL VW1/CATVX |
| Smoke Index Test Method | IEC 61034 |
| Toxicity Index Test Method | IEC 60754-2 |
Packaging and Weights
| Cable weight | 0.07 kg/m | 0.047 lb/ft |
| Packaging Type | Reel |
Regulatory Compliance/Certifications
| Agency | Classification |
CENELEC
|
EN 50575 compliant, Declaration of Performance (DoP) available |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant |
CHINA-ROHS
|
Below maximum concentration value |
| REACH-SVHC | Compliant as per SVHC revision on www.commscope.com/ProductCompliance |
| UK-ROHS | Compliant |
Product Classification
| Product Type | Braided coaxial cable |
| Product Brand | CNT® |
| Product Series | CNT-400 |
General Specifications
| Braid Coverage | 90 % |
| Cable Type | CNT-400 |
| Jacket Color | Black |
Dimensions
| Diameter Over Dielectric | 7.24 mm | 0.285 in |
| Diameter Over Jacket | 10.29 mm | 0.405 in |
| Diameter Over Tape | 7.391 mm | 0.291 in |
| Inner Conductor OD | 2.74 mm | 0.108 in |
| Outer Conductor OD | 8.08 mm | 0.318 in |
| Nominal Size | 0.400 in |
Electrical Specifications
| Cable Impedance | 50 ohm |
| Capacitance | 78 pF/m | 23.774 pF/ft |
| dc Resistance, Inner Conductor | 4.49 ohms/km | 1.369 ohms/kft |
| dc Resistance, Outer Conductor | 5.61 ohms/km | 1.71 ohms/kft |
| dc Test Voltage | 2500 V |
| Jacket Spark Test Voltage (rms) | 4000 V |
| Maximum Frequency | 16.2 GHz |
| Operating Frequency Band | 30 – 6000 MHz |
| Peak Power | 16 kW |
| Shielding Effectiveness | 90 dB |
| Velocity | 85 % |
Attenuation
| Frequency | Attenuation (dB/100 m) | Attenuation (dB/100 ft) |
| 30.0 MHz | 2.490 | 0.760 |
| 50.0 MHz | 3.180 | 0.970 |
| 150.0 MHz | 4.920 | 1.500 |
| 220.0 MHz | 6.230 | 1.900 |
| 450.0 MHz | 8.860 | 2.700 |
| 900.0 MHz | 12.800 | 3.900 |
| 1500.0 MHz | 16.700 | 5.100 |
| 1800.0 MHz | 18.400 | 5.600 |
| 2000.0 MHz | 19.400 | 5.900 |
| 2400.0 MHz | 21.650 | 6.600 |
| 2500.0 MHz | 22.000 | 6.700 |
| 3000.0 MHz | 24.600 | 7.500 |
| 4000.0 MHz | 28.870 | 8.800 |
| 4500.0 MHz | 30.840 | 9.400 |
| 5000.0 MHz | 32.810 | 10.000 |
| 5200.0 MHz | 33.460 | 10.200 |
| 5500.0 MHz | 34.780 | 10.600 |
| 5800.0 MHz | 35.760 | 10.900 |
| 6000.0 MHz | 36.420 | 11.100 |
Material Specifications
| Braid Material | Tinned copper |
| Dielectric Material | Foam PE |
| Jacket Material | Non-halogenated, fire retardant polyolefin |
| Inner Conductor Material | Copper-clad aluminum wire |
| Shield Tape Material | Aluminum |
Mechanical Specifications
| Minimum Bend Radius, Single Bend | 25.4 mm | 1 in |
| Tensile Strength | 73 kg | 160.937 lb |
| Bending Moment | 0.7 N-m | 6.196 in lb |
| Flat Plate Crush Strength | 0.7 kg/mm | 39.198 lb/in |
Environmental Specifications
| Installation temperature | -40 °C to +60 °C (-40 °F to +140 °F) |
| Operating Temperature | -40 °C to +60 °C (-40 °F to +140 °F) |
| Storage Temperature | -40 °C to +60 °C (-40 °F to +140 °F) |
| EN50575 CPR Cable EuroClass Fire Performance | Dca |
| EN50575 CPR Cable EuroClass Smoke Rating | s2 |
| EN50575 CPR Cable EuroClass Droplets Rating | d2 |
| Fire Retardancy Test Method | UL VW1/CATVX |
| Smoke Index Test Method | IEC 61034 |
| Toxicity Index Test Method | IEC 60754-2 |
Packaging and Weights
| Cable weight | 0.07 kg/m | 0.047 lb/ft |
| Packaging Type | Reel |
Regulatory Compliance/Certifications
| Agency | Classification |
|
CENELEC
|
EN 50575 compliant, Declaration of Performance (DoP) available |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant |
|
CHINA-ROHS
|
Below maximum concentration value |
| REACH-SVHC | Compliant as per SVHC revision on www.commscope.com/ProductCompliance |
| UK-ROHS | Compliant |
Documentation & Downloads
Product Specification
Warranty
Product Compliance Documentation
Product Specification
Warranty
Related Products and Accessories
Related Products
Connectors
-
![]()
400APNM-CS8 Type N Male for CNT-400 braided cable. Not available in North America. -
![]()
400BPDM-C 7-16 DIN Male for CNT-400 braided cable -
![]()
400BPDM-CR 7-16 DIN Male for CNT-400 and CNT-400-Flex braided cable -
![]()
400BPNF-C Type N Female for CNT-400 braided cable -
![]()
400BPNF-C-CR Type N Female for CNT-400 braided cable -
![]()
400BPNM-C Type N Male for CNT-400 braided cable -
![]()
400BPNM-C-CR Type N Male for CNT-400 braided cable -
![]()
400BPNM-C-G Type N Male for CNT-400 braided cable (Gold Pin) -
![]()
400BPNM-CR Type N Male for CNT-400 and CNT-400-Flex braided cable -
![]()
400BPNR-C Type N Male Right Angle for CNT-400 braided cable -
![]()
400BPNR-C-CR Type N Male Right Angle for CNT-400 braided cable -
![]()
400BPTF-C TNC Female for CNT-400 braided cable -
![]()
400BPTF-C-CR TNC Female for CNT-400 braided cable -
![]()
400BPTM-C TNC Male for CNT-400 braided cable -
![]()
400BPTR-C TNC Male Right Angle for CNT-400 braided cable -
![]()
400PBM-CR BNC Male for CNT-400 braided cable -
![]()
400PDR-CR 7-16 DIN Male Right Angle for CNT-400 braided cable -
![]()
400PHM-C-CR Type 4.3-10 Male connector for CNT-400 braided cable -
![]()
400PQMR-CR QMA Male Right Angle for CNT-400 braided cable -
![]()
400PSM-CR SMA Male for CNT-400 braided cable -
![]()
400PUM UHF Male for CNT-400 braided cable
Structural Support, Tools & Accessories
-
![]()
912MCLICK Miniature Click-on Hanger for 9–12 mm cable - Hardware Sold Separately (search MCLICK-SERIES-HARDWARE for options avaliable) -
![]()
R8-CLAMP-1B KwikClamp™ Hanger for RG8 cable, single stack; includes hardware -
![]()
R8-CLAMP-2B KwikClamp™ Hanger for RG8 cable, double stack; includes hardware -
![]()
R8-CLAMP-3B KwikClamp™ Hanger for RG8 cable, triple stack; includes hardware -
![]()
R8-CLAMP-4B KwikClamp™ Hanger for RG8 cable, quadruple stack; includes hardware -
![]()
SSH-411 PIM-Guard®, SnapTak® Adjustable Hanger, Gen 2. Fits 4.0 mm to 11.0 mm Cables – PIM Free Polymer Construction. No Grommets Required
-
![]()
252026-10KT-P Angle Adapter for Miniature Click-on Hanger, kit of 10, (no hardware included) -
![]()
252029-10KT-P Hardware Kit for Miniature Click-on Hangers, includes 5/16 in bolts and hardware, 6.72 in (170 mm) length, kit of 10, (no angle adapter included)
-
![]()
JST-400A Jacket Stripping Tool for CNT-400 braided cable
Related Products
Connectors
-
![]()
400APNM-CS8 Type N Male for CNT-400 braided cable. Not available in North America. -
![]()
400BPDM-C 7-16 DIN Male for CNT-400 braided cable -
![]()
400BPDM-CR 7-16 DIN Male for CNT-400 and CNT-400-Flex braided cable -
![]()
400BPNF-C Type N Female for CNT-400 braided cable -
![]()
400BPNF-C-CR Type N Female for CNT-400 braided cable -
![]()
400BPNM-C Type N Male for CNT-400 braided cable -
![]()
400BPNM-C-CR Type N Male for CNT-400 braided cable -
![]()
400BPNM-C-G Type N Male for CNT-400 braided cable (Gold Pin) -
![]()
400BPNM-CR Type N Male for CNT-400 and CNT-400-Flex braided cable -
![]()
400BPNR-C Type N Male Right Angle for CNT-400 braided cable -
![]()
400BPNR-C-CR Type N Male Right Angle for CNT-400 braided cable -
![]()
400BPTF-C TNC Female for CNT-400 braided cable -
![]()
400BPTF-C-CR TNC Female for CNT-400 braided cable -
![]()
400BPTM-C TNC Male for CNT-400 braided cable -
![]()
400BPTR-C TNC Male Right Angle for CNT-400 braided cable -
![]()
400PBM-CR BNC Male for CNT-400 braided cable -
![]()
400PDR-CR 7-16 DIN Male Right Angle for CNT-400 braided cable -
![]()
400PHM-C-CR Type 4.3-10 Male connector for CNT-400 braided cable -
![]()
400PQMR-CR QMA Male Right Angle for CNT-400 braided cable -
![]()
400PSM-CR SMA Male for CNT-400 braided cable -
![]()
400PUM UHF Male for CNT-400 braided cable
Structural Support, Tools & Accessories
-
![]()
912MCLICK Miniature Click-on Hanger for 9–12 mm cable - Hardware Sold Separately (search MCLICK-SERIES-HARDWARE for options avaliable) -
![]()
R8-CLAMP-1B KwikClamp™ Hanger for RG8 cable, single stack; includes hardware -
![]()
R8-CLAMP-2B KwikClamp™ Hanger for RG8 cable, double stack; includes hardware -
![]()
R8-CLAMP-3B KwikClamp™ Hanger for RG8 cable, triple stack; includes hardware -
![]()
R8-CLAMP-4B KwikClamp™ Hanger for RG8 cable, quadruple stack; includes hardware -
![]()
SSH-411 PIM-Guard®, SnapTak® Adjustable Hanger, Gen 2. Fits 4.0 mm to 11.0 mm Cables – PIM Free Polymer Construction. No Grommets Required
-
![]()
252026-10KT-P Angle Adapter for Miniature Click-on Hanger, kit of 10, (no hardware included) -
![]()
252029-10KT-P Hardware Kit for Miniature Click-on Hangers, includes 5/16 in bolts and hardware, 6.72 in (170 mm) length, kit of 10, (no angle adapter included)
-
![]()
JST-400A Jacket Stripping Tool for CNT-400 braided cable
Other Ways to Browse
