1. Accueil
  2. Type de produit
  3. Antennes
  4. Équipements et antennes de station de base
  5. Antennes de station de base
  6. FFV4Q4-65D-R7
Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

FFV4Q4-65D-R7

20-port sector antenna, 4x 617-894, 8x 1695-2690 MHz 65° HPBW and 8x 2500-4000 MHz, Beamformer, 7x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • All Internal RET actuators are connected in "Cascaded SRET" configuration
  • Cluster connectors for the beam-forming array, including eight RF ports plus one calibration port

General Specifications

Antenna Type Sector and beamforming
Band Multiband
Calibration Connector Interface M-LOC
Calibration Connector Quantity 1
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female | M-LOC
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, mid band 8
RF Connector Quantity, low band 4
RF Connector Quantity, total 20

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (1) | Low band (2) | Mid band (4)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 2688 mm | 105.827 in
TDD Column Spacing 58 mm | 2.283 in

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Logo Image

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 617 – 894 MHz | 1695 – 2690 MHz | 2500 – 4000 MHz
Polarization ±45°
Total Input Power, maximum 1,400 W @ 50 °C

Electrical Specifications

R1,R2 R1,R2 Y1-Y4 Y1-Y4 Y1-Y4 P1 P1 P1
Frequency Band, MHz 617–698 698–894 1695–1920 1920–2200 2490–2690 2500–2690 3300–3800 3700–4000
RF Port 1,2,3,4 1,2,3,4 5-12 5-12 5-12 13-20 13-20 13-20
Gain, dBi 15.2 16.1 16.6 17.3 17.6 16.0 16.4 15.9
Beamwidth, Horizontal, degrees 69 60 60 57 49 90 66 64
Beamwidth, Vertical, degrees 9.5 8.1 6.5 5.9 5.2 5.9 6 6.2
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 16 17 15 16 15 17 15 15
Front-to-Back Ratio at 180°, dB 29 29 35 34 30 33 27 25
Coupling level, Amp, Antenna port to Cal port, dB 26 26 26
Coupling level, max Amp Δ, Antenna port to Cal port, dB ±2 ±2 ±2
Coupler, max Amp Δ, Antenna port to Cal port, dB 0.9 0.9 0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees 7 7 7
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25 25 25 25
Isolation, Co-polarization, dB 18 18 18
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -140 -140 -140
Input Power per Port at 50°C, maximum, watts 250 250 200 200 200 80 80 80

Electrical Specifications, Broadcast 65

Frequency Band, MHz 617–698 698–894 1695–1920 1920–2200 2490–2690 2500–2690 3300–3800 3700–4000
Gain, dBi 18.2 17.4 16.6
Beamwidth, Horizontal, degrees 55 59 61
Beamwidth, Vertical, degrees 5.9 5.9 6.2
Front-to-Back Total Power at 180° ± 30°, dB 30 23 19
USLS (First Lobe), dB 17 17 17

Electrical Specifications, Envelope Pattern

Frequency Band, MHz 617–698 698–894 1695–1920 1920–2200 2490–2690 2500–2690 3300–3800 3700–4000
Gain, dBi 21.0 21.0 20.6
Beamwidth, Horizontal at 10 dB, degrees 120 125 126
Beamwidth, Vertical at 3 dB, degrees 5.8 6.0 6.0
Front-to-Back Total Power at 180° ± 30°, dB 31 26 23
USLS (First Lobe), dB 19 18 16

Electrical Specifications, Service Beam

Frequency Band, MHz 617–698 698–894 1695–1920 1920–2200 2490–2690 2500–2690 3300–3800 3700–4000
Steered 0° Gain, dBi 20.4 20.9 20.4
Steered 0° Beamwidth, Horizontal, degrees 25 19 19
Steered 0° Front-to-Back Total Power at 180° ± 30°, dB 33 28 25
Steered 0° Horizontal Sidelobe, dB 13 11 11
Steered 30° Gain, dBi 20.3 19.3 18.8
Steered 30° Beamwidth, Horizontal, degrees 27 22 18
Steered 30° Front-to-Back Total Power at 180° ± 30°, dB 32 26 23

Electrical Specifications, Soft Split

Frequency Band, MHz 617–698 698–894 1695–1920 1920–2200 2490–2690 2500–2690 3300–3800 3700–4000
Gain, dBi 20.2
Beamwidth, Horizontal, degrees 30
Front-to-Back Total Power at 180° ± 30°, dB 32
Horizontal Sidelobe, dB 17

Mechanical Specifications

Wind Loading @ Velocity, frontal 970.0 N @ 150 km/h (218.1 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 304.0 N @ 150 km/h (68.3 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,162.0 N @ 150 km/h (261.2 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 667.0 N @ 150 km/h (149.9 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 565 mm | 22.244 in
Depth, packed 309 mm | 12.165 in
Length, packed 2935 mm | 115.551 in
Weight, gross 70.5 kg | 155.426 lb
Weight, net 47.2 kg | 104.058 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

General Specifications

Antenna Type Sector and beamforming
Band Multiband
Calibration Connector Interface M-LOC
Calibration Connector Quantity 1
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female | M-LOC
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, mid band 8
RF Connector Quantity, low band 4
RF Connector Quantity, total 20

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (1) | Low band (2) | Mid band (4)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 2688 mm | 105.827 in
TDD Column Spacing 58 mm | 2.283 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 617 – 894 MHz | 1695 – 2690 MHz | 2500 – 4000 MHz
Polarization ±45°
Total Input Power, maximum 1,400 W @ 50 °C

Electrical Specifications

R1,R2 R1,R2 Y1-Y4 Y1-Y4 Y1-Y4 P1 P1 P1
Frequency Band, MHz 617–698 698–894 1695–1920 1920–2200 2490–2690 2500–2690 3300–3800 3700–4000
RF Port 1,2,3,4 1,2,3,4 5-12 5-12 5-12 13-20 13-20 13-20
Gain, dBi 15.2 16.1 16.6 17.3 17.6 16.0 16.4 15.9
Beamwidth, Horizontal, degrees 69 60 60 57 49 90 66 64
Beamwidth, Vertical, degrees 9.5 8.1 6.5 5.9 5.2 5.9 6 6.2
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 16 17 15 16 15 17 15 15
Front-to-Back Ratio at 180°, dB 29 29 35 34 30 33 27 25
Coupling level, Amp, Antenna port to Cal port, dB 26 26 26
Coupling level, max Amp Δ, Antenna port to Cal port, dB ±2 ±2 ±2
Coupler, max Amp Δ, Antenna port to Cal port, dB 0.9 0.9 0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees 7 7 7
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25 25 25 25
Isolation, Co-polarization, dB 18 18 18
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -140 -140 -140
Input Power per Port at 50°C, maximum, watts 250 250 200 200 200 80 80 80

Electrical Specifications, Broadcast 65

Frequency Band, MHz 617–698 698–894 1695–1920 1920–2200 2490–2690 2500–2690 3300–3800 3700–4000
Gain, dBi 18.2 17.4 16.6
Beamwidth, Horizontal, degrees 55 59 61
Beamwidth, Vertical, degrees 5.9 5.9 6.2
Front-to-Back Total Power at 180° ± 30°, dB 30 23 19
USLS (First Lobe), dB 17 17 17

Electrical Specifications, Envelope Pattern

Frequency Band, MHz 617–698 698–894 1695–1920 1920–2200 2490–2690 2500–2690 3300–3800 3700–4000
Gain, dBi 21.0 21.0 20.6
Beamwidth, Horizontal at 10 dB, degrees 120 125 126
Beamwidth, Vertical at 3 dB, degrees 5.8 6.0 6.0
Front-to-Back Total Power at 180° ± 30°, dB 31 26 23
USLS (First Lobe), dB 19 18 16

Electrical Specifications, Service Beam

Frequency Band, MHz 617–698 698–894 1695–1920 1920–2200 2490–2690 2500–2690 3300–3800 3700–4000
Steered 0° Gain, dBi 20.4 20.9 20.4
Steered 0° Beamwidth, Horizontal, degrees 25 19 19
Steered 0° Front-to-Back Total Power at 180° ± 30°, dB 33 28 25
Steered 0° Horizontal Sidelobe, dB 13 11 11
Steered 30° Gain, dBi 20.3 19.3 18.8
Steered 30° Beamwidth, Horizontal, degrees 27 22 18
Steered 30° Front-to-Back Total Power at 180° ± 30°, dB 32 26 23

Electrical Specifications, Soft Split

Frequency Band, MHz 617–698 698–894 1695–1920 1920–2200 2490–2690 2500–2690 3300–3800 3700–4000
Gain, dBi 20.2
Beamwidth, Horizontal, degrees 30
Front-to-Back Total Power at 180° ± 30°, dB 32
Horizontal Sidelobe, dB 17

Mechanical Specifications

Wind Loading @ Velocity, frontal 970.0 N @ 150 km/h (218.1 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 304.0 N @ 150 km/h (68.3 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,162.0 N @ 150 km/h (261.2 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 667.0 N @ 150 km/h (149.9 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 565 mm | 22.244 in
Depth, packed 309 mm | 12.165 in
Length, packed 2935 mm | 115.551 in
Weight, gross 70.5 kg | 155.426 lb
Weight, net 47.2 kg | 104.058 lb
Click on image to enlarge.
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

Assembly Drawing

Line drawing

Product Compliance Documentation

Global Trade Data
Statement of Compliance RoHS/REACH

Product Information

Antenna Patterns | (login required)

Product Specification

FFV4Q4-65D-R7 Product specifications
FFV4Q4-65D-R7 Product specifications (Comprehensive)

Warranty

CommScope Limited Product Warranty

Assembly Drawing

Line drawing

Product Compliance Documentation

Global Trade Data
Statement of Compliance RoHS/REACH

Product Information

Antenna Patterns | (login required)

Product Specification

FFV4Q4-65D-R7 Product specifications
FFV4Q4-65D-R7 Product specifications (Comprehensive)

Warranty

CommScope Limited Product Warranty