Warning Icon
This product was discontinued on: March 30, 2022

For other alternatives, please contact us for more information.

0 Replacement products available

R2V4PX308R

12-port sector antenna, 4x 698–960 and 8x 1710–2690 MHz, 65° HPBW, 6x RET with manual override. Bands cascaded SRET (Antenna 1 and Antenna 2).

Specifications
Finish making your selections or clear them to view relevant specifications.

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material ASA, UV stabilized
Radiator Material Brass | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, mid band 0
RF Connector Quantity, low band 4
RF Connector Quantity, total 12

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET High band (4) | Low band (2)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 641 mm | 25.236 in
Depth 244 mm | 9.606 in
Length 2074 mm | 81.654 in
Net Weight, without mounting kit 60 kg | 132.277 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 960 MHz | 1710 – 2690 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 698–790 790–890 890–960 1710–1920 1920–2170 2300–2690
Gain, dBi 15.1 15.5 15.9 16.4 17.2 17.9
Beamwidth, Horizontal, degrees 65 62 59 62 58 59
Beamwidth, Vertical, degrees 12.3 11 9.9 10.4 9.2 7.4
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10 0–10
USLS (First Lobe), dB 18 18 18 18 18 18
Front-to-Back Ratio at 180°, dB 33 33 32 32 33 37
CPR at Boresight, dB 23 19 18 23 21 14
CPR at Sector, dB 13 14 12 13 11 2
Isolation, Cross Polarization, dB 25 25 25 25 25 25
Isolation, Inter-band, dB 30 30 30 30 30 30
VSWR | Return loss, dB 1.43 | 15.0 1.43 | 15.0 1.43 | 15.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150
Input Power per Port, maximum, watts 300 300 300 250 250 250

Mechanical Specifications

Wind Loading @ Velocity, frontal 1,673.0 N @ 150 km/h (376.1 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 374.0 N @ 150 km/h (84.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 1,764.0 N @ 150 km/h (396.6 lbf @ 150 km/h)
Wind Speed, maximum 250 km/h (155 mph)

Packaging and Weights

Width, packed 739 mm | 29.095 in
Depth, packed 371 mm | 14.606 in
Length, packed 2280 mm | 89.764 in
Weight, gross 83 kg | 182.983 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material ASA, UV stabilized
Radiator Material Brass | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, mid band 0
RF Connector Quantity, low band 4
RF Connector Quantity, total 12

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET High band (4) | Low band (2)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 641 mm | 25.236 in
Depth 244 mm | 9.606 in
Length 2074 mm | 81.654 in
Net Weight, without mounting kit 60 kg | 132.277 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 960 MHz | 1710 – 2690 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 698–790 790–890 890–960 1710–1920 1920–2170 2300–2690
Gain, dBi 15.1 15.5 15.9 16.4 17.2 17.9
Beamwidth, Horizontal, degrees 65 62 59 62 58 59
Beamwidth, Vertical, degrees 12.3 11 9.9 10.4 9.2 7.4
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10 0–10
USLS (First Lobe), dB 18 18 18 18 18 18
Front-to-Back Ratio at 180°, dB 33 33 32 32 33 37
CPR at Boresight, dB 23 19 18 23 21 14
CPR at Sector, dB 13 14 12 13 11 2
Isolation, Cross Polarization, dB 25 25 25 25 25 25
Isolation, Inter-band, dB 30 30 30 30 30 30
VSWR | Return loss, dB 1.43 | 15.0 1.43 | 15.0 1.43 | 15.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150
Input Power per Port, maximum, watts 300 300 300 250 250 250

Mechanical Specifications

Wind Loading @ Velocity, frontal 1,673.0 N @ 150 km/h (376.1 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 374.0 N @ 150 km/h (84.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 1,764.0 N @ 150 km/h (396.6 lbf @ 150 km/h)
Wind Speed, maximum 250 km/h (155 mph)

Packaging and Weights

Width, packed 739 mm | 29.095 in
Depth, packed 371 mm | 14.606 in
Length, packed 2280 mm | 89.764 in
Weight, gross 83 kg | 182.983 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant/Exempted

Assembly Drawing

Installation Instruction

Product Specification

Assembly Drawing

Installation Instruction

Product Specification