T4S4-90A-R2
16-port Planar Array Antenna, 8x 2300–2690 and 8x 3300-3800 MHz, 90° HPBW, 2x RET
Features and Benefits
- For use in beamforming systems includes one calibration port per band
Specifications
General Specifications
| Antenna Type | Sector |
| Band | Multiband |
| Calibration Connector Interface | 4.3-10 Female |
| Calibration Connector Quantity | 2 |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Low loss circuit board |
| RF Connector Interface | 4.3-10 Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 16 |
| RF Connector Quantity, total | 16 |
Remote Electrical Tilt (RET) Information
| RET Hardware | CommRET v2 |
| RET Interface | 8-pin DIN Female | 8-pin DIN Male |
| RET Interface, quantity | 1 female | 1 male |
| Internal RET | High band (2) |
| Power Consumption, idle state, maximum | 1 W |
| Power Consumption, normal conditions, maximum | 8 W |
| Protocol | 3GPP/AISG 2.0 (Single RET) |
Dimensions
| Width | 498 mm | 19.606 in |
| Depth | 197 mm | 7.756 in |
| Length | 1499 mm | 59.016 in |
| Net Weight, without mounting kit | 31.5 kg | 69.446 lb |
Array Layout
| Click on image to enlarge. |
Port Configuration
| Click on image to enlarge. |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 2300 – 2690 MHz | 3300 – 3800 MHz |
| Polarization | ±45° |
| Total Input Power, maximum | 900 W @ 50 °C |
Electrical Specifications
| Y1 | Y1 | P1 | P1 | |
| Frequency Band, MHz | 2300–2500 | 2500–2690 | 3300–3600 | 3600–3800 |
| Gain, dBi | 16.5 | 16.5 | 15.7 | 16.1 |
| Beamwidth, Horizontal, degrees | 103 | 97 | 99 | 92 |
| Beamwidth, Vertical, degrees | 5.2 | 5 | 6.7 | 6.3 |
| Beam Tilt, degrees | 2–12 | 2–12 | 2–12 | 2–12 |
| USLS (First Lobe), dB | 18 | 20 | 15 | 14 |
| Front-to-Back Ratio at 180°, dB | 35 | 35 | 30 | 29 |
| Coupling level, Amp, Antenna port to Cal port, dB | 26 | 26 | 26 | 26 |
| Coupling level, max Amp Δ, Antenna port to Cal port, dB | ±2 | ±2 | ±2 | ±2 |
| Coupler, max Amp Δ, Antenna port to Cal port, dB | 0.9 | 0.9 | 0.9 | 0.9 |
| Coupler, max Phase Δ, Antenna port to Cal port, degrees | 7 | 7 | 7 | 7 |
| Isolation, Inter-band, dB | 18 | 18 | 18 | 18 |
| Isolation, Cross Polarization, port to port, dB | 25 | 25 | 25 | 25 |
| Isolation, Cross Polarization, port to port, between two columns, dB | 30 | 30 | 30 | 30 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -140 | -140 | -140 | -140 |
| Input Power per Port at 50°C, maximum, watts | 150 | 150 | 75 | 75 |
Electrical Specifications, Broadcast 65
| Frequency Band, MHz | 2300–2500 | 2500–2690 | 3300–3600 | 3600–3800 |
| Gain, dBi | 17.9 | 17.9 | 16.2 | 16.3 |
| Beamwidth, Horizontal, degrees | 63 | 62 | 67 | 65 |
| Beamwidth, Horizontal Tolerance, degrees | ±4.9 | ±3.2 | ±7.8 | ±4.9 |
| Beamwidth, Vertical, degrees | 5.2 | 4.9 | 6.7 | 6.3 |
| Beamwidth, Vertical Tolerance, degrees | ±0.2 | ±0.2 | ±0.4 | ±0.4 |
Electrical Specifications, Service Beam
| Frequency Band, MHz | 2300–2500 | 2500–2690 | 3300–3600 | 3600–3800 |
| Steered 0° Gain, dBi | 21.6 | 21.8 | 20.6 | 20.8 |
| Steered 0° Gain Tolerance, dBi | ±0.3 | ±0.4 | ±0.4 | ±0.6 |
| Steered 0° Beamwidth, Horizontal, degrees | 27 | 25 | 25 | 23 |
| Steered 0° CPR at Beampeak, dB | 16 | 16 | 20 | 15 |
| Steered 0° Horizontal Sidelobe, dB | 12 | 11 | 12 | 12 |
| Steered 30° Gain, dBi | 21.2 | 21.2 | 19.8 | 19.9 |
| Steered 30° Gain Tolerance, dBi | ±0.3 | ±0.5 | ±0.4 | ±0.5 |
| Steered 30° Beamwidth, Horizontal, degrees | 29 | 27 | 29 | 27 |
| Steered 30° Horizontal Sidelobe, dB | 10 | 9 | 10 | 9 |
Electrical Specifications, Soft Split
| Frequency Band, MHz | 2300–2500 | 2500–2690 | 3300–3600 | 3600–3800 |
| Gain, dBi | 21.1 | 21.1 | 19.7 | 19.9 |
| Beamwidth, Horizontal, degrees | 32 | 31 | 32 | 30 |
| CPR at Beampeak, dB | 16 | 15 | 18 | 16 |
| Horizontal Sidelobe, dB | 18 | 17 | 18 | 17 |
Mechanical Specifications
| Mechanical Tilt Range | 0°–15° |
| Wind Loading @ Velocity, frontal | 549.0 N @ 150 km/h (123.4 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 183.0 N @ 150 km/h (41.1 lbf @ 150 km/h) |
| Wind Loading @ Velocity, maximum | 712.0 N @ 150 km/h (160.1 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 452.0 N @ 150 km/h (101.6 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 608 mm | 23.937 in |
| Depth, packed | 352 mm | 13.858 in |
| Length, packed | 1682 mm | 66.221 in |
| Weight, gross | 44 kg | 97.003 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant/Exempted |
CHINA-ROHS
|
Above maximum concentration value |
| UK-ROHS | Compliant/Exempted |
General Specifications
| Antenna Type | Sector |
| Band | Multiband |
| Calibration Connector Interface | 4.3-10 Female |
| Calibration Connector Quantity | 2 |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Low loss circuit board |
| RF Connector Interface | 4.3-10 Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 16 |
| RF Connector Quantity, total | 16 |
Remote Electrical Tilt (RET) Information
| RET Hardware | CommRET v2 |
| RET Interface | 8-pin DIN Female | 8-pin DIN Male |
| RET Interface, quantity | 1 female | 1 male |
| Internal RET | High band (2) |
| Power Consumption, idle state, maximum | 1 W |
| Power Consumption, normal conditions, maximum | 8 W |
| Protocol | 3GPP/AISG 2.0 (Single RET) |
Dimensions
| Width | 498 mm | 19.606 in |
| Depth | 197 mm | 7.756 in |
| Length | 1499 mm | 59.016 in |
| Net Weight, without mounting kit | 31.5 kg | 69.446 lb |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 2300 – 2690 MHz | 3300 – 3800 MHz |
| Polarization | ±45° |
| Total Input Power, maximum | 900 W @ 50 °C |
Electrical Specifications
| Y1 | Y1 | P1 | P1 | |
| Frequency Band, MHz | 2300–2500 | 2500–2690 | 3300–3600 | 3600–3800 |
| Gain, dBi | 16.5 | 16.5 | 15.7 | 16.1 |
| Beamwidth, Horizontal, degrees | 103 | 97 | 99 | 92 |
| Beamwidth, Vertical, degrees | 5.2 | 5 | 6.7 | 6.3 |
| Beam Tilt, degrees | 2–12 | 2–12 | 2–12 | 2–12 |
| USLS (First Lobe), dB | 18 | 20 | 15 | 14 |
| Front-to-Back Ratio at 180°, dB | 35 | 35 | 30 | 29 |
| Coupling level, Amp, Antenna port to Cal port, dB | 26 | 26 | 26 | 26 |
| Coupling level, max Amp Δ, Antenna port to Cal port, dB | ±2 | ±2 | ±2 | ±2 |
| Coupler, max Amp Δ, Antenna port to Cal port, dB | 0.9 | 0.9 | 0.9 | 0.9 |
| Coupler, max Phase Δ, Antenna port to Cal port, degrees | 7 | 7 | 7 | 7 |
| Isolation, Inter-band, dB | 18 | 18 | 18 | 18 |
| Isolation, Cross Polarization, port to port, dB | 25 | 25 | 25 | 25 |
| Isolation, Cross Polarization, port to port, between two columns, dB | 30 | 30 | 30 | 30 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -140 | -140 | -140 | -140 |
| Input Power per Port at 50°C, maximum, watts | 150 | 150 | 75 | 75 |
Electrical Specifications, Broadcast 65
| Frequency Band, MHz | 2300–2500 | 2500–2690 | 3300–3600 | 3600–3800 |
| Gain, dBi | 17.9 | 17.9 | 16.2 | 16.3 |
| Beamwidth, Horizontal, degrees | 63 | 62 | 67 | 65 |
| Beamwidth, Horizontal Tolerance, degrees | ±4.9 | ±3.2 | ±7.8 | ±4.9 |
| Beamwidth, Vertical, degrees | 5.2 | 4.9 | 6.7 | 6.3 |
| Beamwidth, Vertical Tolerance, degrees | ±0.2 | ±0.2 | ±0.4 | ±0.4 |
Electrical Specifications, Service Beam
| Frequency Band, MHz | 2300–2500 | 2500–2690 | 3300–3600 | 3600–3800 |
| Steered 0° Gain, dBi | 21.6 | 21.8 | 20.6 | 20.8 |
| Steered 0° Gain Tolerance, dBi | ±0.3 | ±0.4 | ±0.4 | ±0.6 |
| Steered 0° Beamwidth, Horizontal, degrees | 27 | 25 | 25 | 23 |
| Steered 0° CPR at Beampeak, dB | 16 | 16 | 20 | 15 |
| Steered 0° Horizontal Sidelobe, dB | 12 | 11 | 12 | 12 |
| Steered 30° Gain, dBi | 21.2 | 21.2 | 19.8 | 19.9 |
| Steered 30° Gain Tolerance, dBi | ±0.3 | ±0.5 | ±0.4 | ±0.5 |
| Steered 30° Beamwidth, Horizontal, degrees | 29 | 27 | 29 | 27 |
| Steered 30° Horizontal Sidelobe, dB | 10 | 9 | 10 | 9 |
Electrical Specifications, Soft Split
| Frequency Band, MHz | 2300–2500 | 2500–2690 | 3300–3600 | 3600–3800 |
| Gain, dBi | 21.1 | 21.1 | 19.7 | 19.9 |
| Beamwidth, Horizontal, degrees | 32 | 31 | 32 | 30 |
| CPR at Beampeak, dB | 16 | 15 | 18 | 16 |
| Horizontal Sidelobe, dB | 18 | 17 | 18 | 17 |
Mechanical Specifications
| Mechanical Tilt Range | 0°–15° |
| Wind Loading @ Velocity, frontal | 549.0 N @ 150 km/h (123.4 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 183.0 N @ 150 km/h (41.1 lbf @ 150 km/h) |
| Wind Loading @ Velocity, maximum | 712.0 N @ 150 km/h (160.1 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 452.0 N @ 150 km/h (101.6 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 608 mm | 23.937 in |
| Depth, packed | 352 mm | 13.858 in |
| Length, packed | 1682 mm | 66.221 in |
| Weight, gross | 44 kg | 97.003 lb |
| Click on image to enlarge. |
| Click on image to enlarge. |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant/Exempted |
|
CHINA-ROHS
|
Above maximum concentration value |
| UK-ROHS | Compliant/Exempted |
Documentation & Downloads
Assembly Drawing
Installation Instruction
Product Information
Product Specification
Warranty
Assembly Drawing
Engineering Report
Installation Instruction
Product Compliance Documentation
Product Information
Product Specification
Warranty
Related Products and Accessories
Included Products
Antennas
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Structural Support, Tools & Accessories
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Related Products
Antennas
-
![]()
APS-XT Antenna Orientation and Location Sensing System
Included Products
Antennas
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Structural Support, Tools & Accessories
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Related Products
Antennas
-
![]()
APS-XT Antenna Orientation and Location Sensing System
Other Ways to Browse
