Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

VVSSP-65S-R1BV2-V4

10-port small cell antenna, 4x 1695–2690, 4x 3300-4200 and 2x 5150-5925 MHz. 65° HPBW, Internal RET and SBT

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.

General Specifications

Antenna Type Small Cell
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material PVC, UV resistant
Radiator Material Aluminum | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 10
RF Connector Quantity, total 10

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Male
RET Interface, quantity 1 male
Input Voltage 10–30 Vdc
Internal Bias Tee Port 1
Internal RET High band (1)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 307 mm | 12.087 in
Depth 118 mm | 4.646 in
Length 600 mm | 23.622 in
Net Weight, antenna only 6.9 kg | 15.212 lb

5 GHz Port Power Table

Click on image to enlarge.

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1695 – 2690 MHz | 3300 – 4200 MHz | 5150 – 5925 MHz
Polarization ±45°
Total Input Power, maximum 440 W @ 50 °C

Electrical Specifications

Y1,Y2 Y1,Y2 Y1,Y2 P1,P2 P1,P2 P1,P2 O1
Frequency Band, MHz 1695–1920 1920–2180 2300–2690 3300–3550 3550–3700 3700–4200 5150–5925
RF Port 1,2,3,4 1,2,3,4 1,2,3,4 5,6,7,8 5,6,7,8 5,6,7,8 9,10
Gain, dBi 12.5 12.9 13.5 10.4 10.1 10.3 4.1
Gain at Mid Tilt, dBi 12.3 12.4 13.1
Beamwidth, Horizontal, degrees 74 75 68 67 75 69 61
Beamwidth, Vertical, degrees 20.5 18.3 15.9 35.8 32.8 33.1 25.4
Beam Tilt, degrees 2–10 2–10 2–10 7 7 7 4
USLS (First Lobe), dB 14 16 15 15 14 14
Front-to-Back Ratio at 180°, dB 26 24 29 28 28 25 29
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25
Isolation, Inter-band, dB 28 28 28 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -150 -140 -140 -140
Input Power per Port at 50°C, maximum, watts 75 75 75 35 35 35 5

Mechanical Specifications

Wind Loading @ Velocity, frontal 198.0 N @ 150 km/h (44.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 37.0 N @ 150 km/h (8.3 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 240.0 N @ 150 km/h (54.0 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 404 mm | 15.906 in
Depth, packed 276 mm | 10.866 in
Length, packed 772 mm | 30.394 in
Weight, gross 9.4 kg | 20.723 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

General Specifications

Antenna Type Small Cell
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material PVC, UV resistant
Radiator Material Aluminum | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 10
RF Connector Quantity, total 10

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Male
RET Interface, quantity 1 male
Input Voltage 10–30 Vdc
Internal Bias Tee Port 1
Internal RET High band (1)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 307 mm | 12.087 in
Depth 118 mm | 4.646 in
Length 600 mm | 23.622 in
Net Weight, antenna only 6.9 kg | 15.212 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1695 – 2690 MHz | 3300 – 4200 MHz | 5150 – 5925 MHz
Polarization ±45°
Total Input Power, maximum 440 W @ 50 °C

Electrical Specifications

Y1,Y2 Y1,Y2 Y1,Y2 P1,P2 P1,P2 P1,P2 O1
Frequency Band, MHz 1695–1920 1920–2180 2300–2690 3300–3550 3550–3700 3700–4200 5150–5925
RF Port 1,2,3,4 1,2,3,4 1,2,3,4 5,6,7,8 5,6,7,8 5,6,7,8 9,10
Gain, dBi 12.5 12.9 13.5 10.4 10.1 10.3 4.1
Gain at Mid Tilt, dBi 12.3 12.4 13.1
Beamwidth, Horizontal, degrees 74 75 68 67 75 69 61
Beamwidth, Vertical, degrees 20.5 18.3 15.9 35.8 32.8 33.1 25.4
Beam Tilt, degrees 2–10 2–10 2–10 7 7 7 4
USLS (First Lobe), dB 14 16 15 15 14 14
Front-to-Back Ratio at 180°, dB 26 24 29 28 28 25 29
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25
Isolation, Inter-band, dB 28 28 28 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -150 -140 -140 -140
Input Power per Port at 50°C, maximum, watts 75 75 75 35 35 35 5

Mechanical Specifications

Wind Loading @ Velocity, frontal 198.0 N @ 150 km/h (44.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 37.0 N @ 150 km/h (8.3 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 240.0 N @ 150 km/h (54.0 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 404 mm | 15.906 in
Depth, packed 276 mm | 10.866 in
Length, packed 772 mm | 30.394 in
Weight, gross 9.4 kg | 20.723 lb
Click on image to enlarge.
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification