APT-HFHM
Base Product: SURGE-ARRESTORS
Arrestor Plus® Quarterwave Surge Arrestor 695-2700MHz, with interface types 4.3-10 Female and 4.3-10 Male
Specifications
Product Classification
| Product Type | Quarter wave shorting stub |
| Product Brand | Arrestor Plus® |
| Ordering Note | CommScope® non-standard product |
General Specifications
| Device Type | dc Pass |
| Inner Contact Plating | Silver |
| Interface | 4.3-10 Female |
| Interface 2 | 4.3-10 Male |
| Outer Contact Plating | Trimetal |
Dimensions
| Height | 73 mm | 2.874 in |
| Width | 25 mm | 0.984 in |
| Length | 97 mm | 3.819 in |
Outline Drawing
| Click on image to enlarge. |
Electrical Specifications
| 3rd Order IMD Gain | -117 dB |
| 3rd Order IMD Test Method | Two +43 dBm carriers |
| Insertion Loss, typical | 0.08 dB |
| Connector Impedance | 50 ohm |
| Lightning Surge Current | 10 kA |
| Lightning Surge Current Waveform | 8/20 waveform |
| Operating Frequency Band | 695 – 2700 MHz |
| Peak Instantaneous Power (PIP) | 150 kW RF |
Return Loss/VSWR
| Frequency Band | VSWR | Return Loss (dB) |
| 695–806 MHz | 1.250 | 19.10 |
| 806–2170 MHz | 1.130 | 24.30 |
| 2170–2600 MHz | 1.150 | 23.13 |
Mechanical Specifications
| Coupling Nut Proof Torque | 10 N-m | 88.507 in lb |
| Coupling Nut Retention Force | 449.27 N | 101 lbf |
| Coupling Nut Retention Force Method | MIL-C-39012C-3.25, 4.6.22 |
| Interface Durability | 100 cycles |
| Interface Durability Method | IEC 61169-16:9.5 |
| Mechanical Shock Test Method | MIL-STD-202F, Method 213B, Test Condition C |
Environmental Specifications
| Operating Temperature | -45 °C to +85 °C (-49 °F to +185 °F) |
| Storage Temperature | -70 °C to +150 °C (-94 °F to +302 °F) |
| Attenuation, Ambient Temperature | 20 °C | 68 °F |
| Average Power, Ambient Temperature | 40 °C | 104 °F |
| Corrosion Test Method | MIL-STD-202, Method 101, Test Condition B |
| Immersion Depth | 1 m |
| Immersion Test Mating | Mated |
| Immersion Test Method | IEC 60529:2001, IP68 |
| Moisture Resistance Test Method | MIL-STD-202, Method 106 |
| Thermal Shock Test Method | MIL-STD-202, Method 107, Test Condition A-1, Low Temperature -55 °C |
| Water Jetting Test Mating | Mated |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant/Exempted |
CHINA-ROHS
|
Above maximum concentration value |
| UK-ROHS | Compliant/Exempted |
Product Classification
| Product Type | Quarter wave shorting stub |
| Product Brand | Arrestor Plus® |
| Ordering Note | CommScope® non-standard product |
General Specifications
| Device Type | dc Pass |
| Inner Contact Plating | Silver |
| Interface | 4.3-10 Female |
| Interface 2 | 4.3-10 Male |
| Outer Contact Plating | Trimetal |
Dimensions
| Height | 73 mm | 2.874 in |
| Width | 25 mm | 0.984 in |
| Length | 97 mm | 3.819 in |
Electrical Specifications
| 3rd Order IMD Gain | -117 dB |
| 3rd Order IMD Test Method | Two +43 dBm carriers |
| Insertion Loss, typical | 0.08 dB |
| Connector Impedance | 50 ohm |
| Lightning Surge Current | 10 kA |
| Lightning Surge Current Waveform | 8/20 waveform |
| Operating Frequency Band | 695 – 2700 MHz |
| Peak Instantaneous Power (PIP) | 150 kW RF |
Return Loss/VSWR
| Frequency Band | VSWR | Return Loss (dB) |
| 695–806 MHz | 1.250 | 19.10 |
| 806–2170 MHz | 1.130 | 24.30 |
| 2170–2600 MHz | 1.150 | 23.13 |
Mechanical Specifications
| Coupling Nut Proof Torque | 10 N-m | 88.507 in lb |
| Coupling Nut Retention Force | 449.27 N | 101 lbf |
| Coupling Nut Retention Force Method | MIL-C-39012C-3.25, 4.6.22 |
| Interface Durability | 100 cycles |
| Interface Durability Method | IEC 61169-16:9.5 |
| Mechanical Shock Test Method | MIL-STD-202F, Method 213B, Test Condition C |
Environmental Specifications
| Operating Temperature | -45 °C to +85 °C (-49 °F to +185 °F) |
| Storage Temperature | -70 °C to +150 °C (-94 °F to +302 °F) |
| Attenuation, Ambient Temperature | 20 °C | 68 °F |
| Average Power, Ambient Temperature | 40 °C | 104 °F |
| Corrosion Test Method | MIL-STD-202, Method 101, Test Condition B |
| Immersion Depth | 1 m |
| Immersion Test Mating | Mated |
| Immersion Test Method | IEC 60529:2001, IP68 |
| Moisture Resistance Test Method | MIL-STD-202, Method 106 |
| Thermal Shock Test Method | MIL-STD-202, Method 107, Test Condition A-1, Low Temperature -55 °C |
| Water Jetting Test Mating | Mated |
| Click on image to enlarge. |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant/Exempted |
|
CHINA-ROHS
|
Above maximum concentration value |
| UK-ROHS | Compliant/Exempted |
Documentation & Downloads
Installation Instruction
Product Specification
Warranty
Installation Instruction
Product Compliance Documentation
Product Specification
Warranty
Other Ways to Browse
